Filter
Top Products
Caution: Do not enable MIC or TKIP. They are not supported in this release of the Cisco
7920. If you enable either or both of these features, the Cisco 7920 is not able to communicate with
the Cisco Aironet 1200 AP.
When this popup warning appears, click OK:7.
Choose Security > SSID Manager.
Select the SSID for VLAN2 in the Current SSID List (in this case, VLAN2).a.
Check the Network EAP check box.
Do not check Open Authentication or Shared Authentication.
b.
8.
On the same page, click Apply−Radio0 or Apply−All, as appropriate.9.
When this popup warning appears, click OK:10.
Choose Association and verify the association of the Cisco 7920 on the AP.
It should show EAP−Associated.
11.