Filter
Top Products
6. SEWING
BAS-300G, BAS-311G, BAS-326G
34
6-2. Using the STOP switch
If you press the STOP switch (1) while sewing or test feeding is in progress, the CAUTION indicator (2) will illuminate and
the sewing machine will stop immediately.
<Clearing>
1. Press the RESET key (3).
• The thread will be trimmed, and then the CAUTION
indicator (2) will switch off and the buzzer will stop
sounding.
2. If you do not wish to continue sewing, press the RESET
key (3) once more.
• The program number will flash. Carry out preparation
for the next sewing.
<Continuing sewing from a stopping point>
If you have pressed the STOP switch (1) at times such as if the thread breaks while sewing or the lower thread runs out, you
can resume sewing from the point where the thread ran out.
1
Press the RESET key.
• The thread will be trimmed, and then the CAUTION indicator will switch
off and the buzzer will stop sounding.
2
Press the key to return to the position where sewing stopped.
• When you press the
key, the feed mechanism will move backward
one stitch at a time, and when you press the
key, it will move forward
one stitch at a time. (The feed will move quicker if you keep the key
pressed down.)
3
Depress the foot switch to the 2nd step.
(If using a two-pedal foot switch, depress the start switch.)
•
The sewing machine will start operating and sewing will start.
6-3. Using the thread wiper switch
The thread wiper switch (1) can be used to turn the thread
wiper (2) on and off.
2nd step
2264B
4982Q
4983Q
4443Q
4441Q