Filter
Top Products
4. PREPARATION BEFORE SEWING
24
BAS-300G, BAS-311G, BAS-326G
4-6. Home position detection
Before starting home position detection, check that the
needle bar is at its highest position.
Turn the pulley (1) in the direction of the arrow until the
ridge at the bottom of the thread take-up (2) is aligned with
the processed line on the arm.
1. Turn on the power switch.
The power indicator (3) will illuminate, and the model
number will appear in the PROGRAM No. display (4)
and the specifications class will appear in the menu
display (5).
Specifications
Motor-driven work clamp [ELEC]
Pneumatic work clamp [ Air]
After this, the program number will flash in the
PROGRAM No. display (4).
2. Depress the foot switch to the 2nd step.
(If using a two-pedal foot switch, lower the work clamp
before depressing the start switch (6).)
The sewing machine will move to the home position and
the work clamp will rise.
* For programs with a large number of stitches, the
buzzer will sound after the home position is detected,
and then the feed mechanism will move to the sewing
start position.
NOTE:
If error "E110" appears when the foot switch is
depressed, turn the pulley (1) in the direction of
operation to clear the error.
2nd step
4441Q 4953Q
4952Q
4421Q
5223Q
Aligned
2979B