Brother BAS-300G Wireless Office Headset User Manual


 
3. INSTALLATION
BAS-300G, BAS-311G, BAS-326G
8
(13) Gas spring holders [2 pcs.]
(14) Spacer
(15) Bolt
(16) Nut
(17) Gas spring
(18) Shaft collars [2 pcs.]
(19) Gas spring shaft D
(20) Plain washers [2 pcs.]
(21) Retaining rings E [2 pcs.]
(22) Bolts [2 pcs.]
(23) Plain washers (medium) [2 pcs.]
(24) Plain washers (large) [2 pcs.]
(25) Spring washers [2 pcs.]
(26) Nuts [2 pcs.]
(27) Gas spring shaft U
(28) Set screw
NOTE:
For motor-driven work clamp
specifications, the bolts (22), plain
washers (23), plain washers (24),
spring washers (25) and nuts (26) in
the places marked with * are also used
to install the treadle unit. (Refer to "3-7.
Installing the treadle unit (motor-driven
work clamp specifications)".)
(29) Gas spring support cover
(30) Bolts with washer [6 pcs.]
1902B
4916Q
Be sure to install so
that the side with “UP”
on it is facing upward.