Filter
Top Products
3. INSTALLATION
BAS-300G, BAS-311G, BAS-326G
15
3-11. Connecting the power cord
1. Attach an appropriate plug to the
power cord (1). (The green and yellow
wire is the ground wire.)
2. Insert the plug into a
properly-grounded AC power supply.
* The inside of the control box uses
single-phase power.
NOTE:
Do not use an extension cord. If this is
not observed, it may cause problems
with correct operation.
3-12. Installing the cotton stand
(1) Cotton stand
NOTE:
Fit the washer (2), and then securely
tighten the nut (3) so that the cotton
stand does not move.
<Three-phase
specifications>
<Single-phase
specifications>
Green and yellow wire
(ground wire)
5239Q
Green and yellow wire
(ground wire)
2974B