Filter
Top Products
91
Desk and wall-mounting
Insert the base stand into the holes in the base
of your phone marked ‘RAISED’. You may need
to push quite hard to fix it securely.
Wall-mounted
Your BT In Touch Phones can be wall-mounted
using the screws and wall plugs provided.
Please note
Before you wall-mount your BT In Touch
Phones, check that:
The wall can support the weight of the phone.
The position you choose leaves sufficient space so
that the phone is clear of any obstruction on the
wall, such as a shelf or a cupboard.
The power cable and telephone line cord will reach
their correct wall points.
Use the base stand provided as a template to
pencil on the wall where the drill holes should go.
Drill the holes (diameter 5.5mm) for the screws.
Insert the wall plugs provided (if required).
Drive the screws into the wall, leaving about
5mm free on which to hang the phone.
Press all the cables coming from the BT In
Touch Phone into their guides on the
underside of the unit, as shown below.
WALL
WALL PLUG
SCREW
1
2