Filter
Top Products
The BT In Touch 2000c Carer
Phone in normal use
59
Carer Phone
Testing in an
emergency situation
4 Carer optionsBT Select Services
Making and receiving calls
To make a call
Lift the handset and listen for a dialling
tone.
Dial the number you require.
To end the call, replace the handset.
To dial a Quickdial memory number
Lift the handset, or press the
Handsfree button.
Press the required Quickdial memory
button, for example M1, M2 or M3.
The number stored on that Quickdial
memory button is dialled.
To receive a call
When the phone rings, either:
Pick up the handset and speak.
Or
Press the Handsfree button.
Receiving a call from the User
If your User has pressed the emergency button to
contact you but there is not actually an emergency,
the emergency light on your BT In Touch 2000c
Carer Phone will flash and you will hear the
emergency beeps. To cancel the flashing and
beeping, press and hold down
the Cancel button.
Please note
For future reference, you should advise your User
to phone you using the Directory, (having stored
your number with the prefix
141), so they don’t
accidentally start the emergency sequence again.
See ‘To make a non-emergency call to a Carer’,
on page 34.
Handsfree
Handsfree