Filter
Top Products
20
User Phone & Pendant
Press the Setup button (month flashes).
Press the -/+ on the Volume button to
select the month.
Press the Setup button (day flashes).
Enter the day using the keypad.
Press the Setup button to confirm the
setting.
Warning alerts
If you hear one of the emergency warning
alerts, such as “No mains power” ,“Please
change batteries” or “Telephone line
disconnected” then you must take the necessary
action to rectify the problem.
If you hear “No mains power”
The back-up batteries will automatically take
over for the duration of their battery life (up to
7 hours for new batteries). The mains power
should be reconnected as soon as possible and
the batteries replaced, if necessary.
If you hear “Please change batteries”
Replace the batteries in the BT In Touch 2000
User Phone as soon as possible. 6 x AA
Alkaline batteries are required, see ‘Install (or
replace) the batteries’ on page 16.
If you hear “Telephone line disconnected”
Return to the BT In Touch 2000 User Phone
and check whether the telephone line cord is
still connected to the socket. If disconnected,
then reconnect it immediately (see page 17).
If the telephone line cord is still connected,
then a line fault has occurred and you will need
to contact your network service provider (for
example, BT) as soon as possible.
Important
Before you can use your BT In Touch 2000
User Phone in an emer
gency:
You must
follow the next two sections - ‘Setting up
the emergency facility on your BT In Touch 2000
User Phone’, see page 21 and ‘Registering your BT
In Touch Pendant’, see page 26 - and then test the
BT In Touch 2000 package.
Setup
Setup
Setup
V
o
l
u
m
e