Filter
Top Products
17
Decor 500 ~ 4th Edition ~ 15th July ’03 ~ 5096
To check the answer delay
setting
Press the SKIP
ᮣ
button. The
current answer delay setting
will be announced.
To change the answer delay
setting
Press and hold down the
SKIP
ᮣ
button to skip through
the answer delay settings.
Release the button when you
hear the setting you want.
The new answer delay setting
will be announced.
Memos
You can use your Decor 500 to record
memos that can be played back by
another user. Memos are stored on the
answering machine like caller’s
messages and can be any length up to
the maximum recording time available
(12 minutes). Memos can be played
back in the same way as answering
machine messages, see page 18,
‘To playback messages and memos’.
Press and hold down the
ᮤ
SKIP button. Your Decor 500
will announce, ‘Please speak
after the tone. To end recording,
release the button’.
Speak your memo. The message
light will flash during recording.
To end recording, release the
ᮤ
SKIP button.
To record a memo
ᮤ
Skip
Skip
ᮣ
Stop
ᮤ
Skip
Skip
ᮣ
Stop
ᮤ
Skip
Skip
ᮣ
Stop
ᮤ
Skip
Skip
ᮣ
Stop
Answer delay
Answer delay sets the number of times
your Decor 500 will ring before the
answering machine picks up your call
and starts playing the outgoing
message. The default setting is 6 rings.
You can change this setting to between
2 and 9 rings or time saver.
Time Saver
The time saver feature is useful if you
are out and want to ring in and check if
you have received any new messages.
If your answering machine is set to
time saver you can check whether you
have new messages or not before your
answering machine actually answers
your call. If you have new messages
your answering machine will answer
after 2 rings, if you do not have any
new messages, it will not answer until
6 rings. This enables you to hang up
before you are connected, saving you
time and the cost of the call.