Filter
Top Products
10
Decor 500 ~ 4th Edition ~ 15th July ’03 ~ 5096
There are 3 volume settings
to choose from: HIGH, LOW
or OFF. The default setting is
HIGH.
Ensure the handset is on the
cradle.
Press the STORE button. The
call indicator light will flash.
Press the
✱
button.
Press either, 1 for HIGH, 2 for
LOW or 3 for OFF.
Press the STORE button.
You will hear a confirmation
tone.
(If the ringer is set to OFF,
the call indicator light will still
flash to indicate someone is
calling you).
To set the ringer volume
The ringer pitch can be set to:
HIGH, MID or LOW.
The default setting is HIGH.
Ensure the handset is on the
cradle.
Press the STORE button. The
call indicator light will flash.
Press the
#
button.
To set the ringer pitch
Store
Store
1
2
A
B
C
3
D
E
F
Store
Note
You can swap between using the
handset and handsfree during a call.
If using the handset, press the
HANDSFREE button and replace the
handset to talk in handsfree mode.
If using handsfree mode, lift the handset
to talk privately to your caller and the
handsfree mode will be switched off.
To change the volume when
using handsfree
You can adjust the speaker
volume when you are on a
handsfree call.
Press the VOL
–
+
button.
There are 8 levels to choose
from. It is pre-set to the
mid-range level.
Press and release the
VOL
–
+
button to move
up through the levels. When
the maximum level is reached
you will return to the lowest
level.
Note
You can only change the volume of
a call when using handsfree.
Vol
Vol