BT 500 Cordless Telephone User Manual


 
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com
IMPORTANT
This equipment is not designed for making emergency
telephone call when the power fails. Alternative
arrangements should be made for access to emergency
services.
This product is intended for connection to analogue
public switched telephone networks and private
switchboards in the United Kingdom.
Replacing the handset
battery pack
After a time, you may find that the handset battery is
running out of charge more quickly. This is a standard
sign of wear and the battery pack will need replacing.
See diagrams on page 7 when changing the handset
battery.
Remove the battery compartment cover, by sliding it
downward and lifting off. Disconnect the small
connector plug and remove the old battery pack.
Connect a new MT Li-ion 3.7V 600mAh rechargeable
battery pack by plugging the small battery connector
plug into the socket inside the battery compartment.
Make sure the battery wires are tucked in and then
slide the battery compartment cover back on.
Spare rechargeable battery packs are available from the
BT Verve 500 Helpline 0870 242 6652 or from the email
Helpdesk: bthelpdesk@convergys.com
WARNING
Do not immerse batteries in water or throw them into a
fire, or dispose of them with ordinary domestic refuse.
BT accepts no responsibility for damage caused to your
BT Verve 500 by using any other types of batteries.
Safety information
Only use the power supply suitable for the BT Verve
500 range. Using an unauthorised power supply will
invalidate your guarantee and may damage the
telephone. The item code for the base mains power
supply is 032214. If you have purchased a multiple
pack the item code for the charger mains power
supply is 032216.
Use only the approved rechargeable batteries
supplied. Spare rechargeable batteries are available
from the BT Verve 500 Helpline on 0870 242 6652
or from the email Helpdesk:
bthelpdesk@convergys.com
Do not open the handset (except to replace the
handset battery pack) or the base. This could expose
you to high voltages or other risks. Contact the
Helpline on 0870 242 6652 for all repairs.
If the keylock is switched on, it is NOT possible to
make calls, including to the emergency numbers
(999/112).
Radio signal transmitted between the handset and
base may cause interference to hearing aids.
It is recommended that advice from a qualified expert
be sought before using this product in the vicinity of
emergency/intensive care medical equipment.
It is recommended that if you have a pacemaker
fitted you check with a medical expert before using
this product.
General information
81