Filter
Top Products
Page 82 - Technical Specifications Technical Data
Page 82 - Technical Data IP Office Installation Manual
Technical Specifications 40DHB0002USCL – Issue 9 (28th October 2003)
SNMP Functionality
The IP Office SNMP Agent implements SNMPv1 on a read-only basis for security
reasons.
SNMP Agent Configuration
The following operational items may be configured for the IP Office SNMP Agent using the
IP Office Manager:
SNMP Server:
• Enable/disable
Enabled: the device to respond to SNMP requests and send traps for any associated
events that occur if so configured.
Disabled: the SNMP agent on the device does not respond to SNMP requests or send
traps.
• UDP Port (default 161)
Changes the default port value of the SNMP Agent.
• Read-only community
Community string of up to 32 alphanumeric characters for read-only access.
Two trap destinations:
• IP Address
• UDP Port (default 162)
• Community string of up to 32 alphanumeric characters.
• Event mask specifying the events the trap destination is interested in receiving
- generic (coldStart, warmStart, linkDown, linkUp, authenticationFailure)
- licence – License Key Server access fault notifications
- phone change – connected phone change notification
MIBs Supported
The following MIBs are supported by the IP Office SNMP Agent:
• IETF RFC1213 mib-2 (RFC1213-MIB)
- Provides statistics for LAN, WLAN and WAN interfaces
- Groups supported: system, interfaces, at, ip, icmp, tcp, udp and snmp
• IETF RFC1215
- Provides definitions of generic SNMP traps
- Traps supported: warmStart, coldStart, linkDown, LinkUp and authenticationFailure
• IETF RFC2737 ENTITY-MIB
- Provides architectural representation
- Groups supported: entityPhysical and entityGeneral
• Avaya IPO-PROD-MIB
- Provides device/entity identification OIDs
• Avaya IPO-MIB
- Provides root OIDs for functional MIBs
- Provides system wide notifications for events relating to functional entities.
• ipoGenLKSCommsFailureEvent
• ipoGenLKSCommsOperationalEvent for License Key Server communication
events
• Avaya IPO-PHONES-MIB
- Provides extension/user/phone-port map.
• Phone-port mapping via cross-reference to entPhysicalEntry for port with
entPhysicalIndex value
- Provides notifications of phone change event.
• IpoPhonesChangeEvent