Filter
Top Products
Administering Telephone Options
94 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0
Note:
Note: Table 11 applies to all 9600 Series SIP IP Telephones. Certain 9600 SIP IP
Telephones might have additional, optional information that you can administer.
For more information, see Chapter 8:
Administering Telephone Options.
VLAN Considerations
This section contains information on how to administer 9600 Series SIP IP Telephones to
minimize registration time and maximize performance in a Virtual LAN (VLAN) environment. If
your LAN environment does not include VLANs, set the system parameter L2Q to 2 (off) to
ensure correct operation.
VLAN Tagging
IEEE 802.1Q tagging (VLAN) is a useful method of managing VoIP traffic in your LAN. Avaya
recommends that you establish a voice VLAN, set L2QVLAN to that VLAN, and provide voice
traffic with priority over other traffic. You can set VLAN tagging manually, by DHCP, or in the
46xxsettings.txt file.
If VLAN tagging is enabled (L2Q= 0 or 1), the 9600 Series SIP IP Telephones set the VLAN ID
to L2QVLAN, and the VLAN priority for packets from the telephone to L2QAUD for audio
packets and L2QSIG for signalling packets. The default value (6) for these parameters is the
recommended value for voice traffic in IEEE 802.1D.
Regardless of the tagging setting, a 9600 Series SIP IP Telephone will always transmit packets
from the telephone at absolute priority over packets from secondary Ethernet. The priority
settings are useful only if the downstream equipment is administered to give the voice VLAN
priority.
WMLPROXY " " (Null) Address of WML proxy server. WMLPROXY is used as
the HTTP proxy server by the WML browser application.
If WMLPROXY is null, or if WMLPROXY cannot be
resolved into a valid IP address, an HTTP proxy server is
not used. Value is zero or one IP address in dotted
decimal or DNS name format. Note that WMLPROXY
defines the HTTP proxy server for WML browser
application and HTTPPROXY to perform SCEP
certificate enrollment.
Table 11: 9600 Series SIP IP Telephones Customizeable System Parameters (continued)
Parameter Name Default
Value
Description and Value Range
21 of 21