Filter
Top Products
Administering Options for the 9600 Series SIP IP Telephones
Issue 2 December 2007 81
HTTPEXCEPTION
DOMAINS
" " (Null) Domains to be excluded for SCEP. String representing
zero or one domains in a URL of 0 to 255 characters in
dotted decimal or DNS name format with multiple
domains delimited by commas.
HTTPPORT 80 Destination TCP port used for requests to the HTTP
server during initialization. Range is 0 - 65535.
Note: For SIP Release 1.0, there should be no need to
set this parameter to values other than default value.
HTTPPROXY " " (Null) Zero or one IP or DNS address of the HTTP server for
SCEP. 0 to 255 characters in dotted decimal or DNS
name format followed by a colon and port number. The
colon and port number are optional. If this parameter is
not null, this (proxy) transport address is used to set up
the HTTP connection as the transport protocol for SCEP.
HTTPSRVR 0.0.0.0 List of IP Address(es) or DNS Name(s) of HTTP file
server(s) used to download telephone files. HTTP server
addresses can be in dotted decimal or DNS format, and
must be separated by commas (0-255 ASCII characters,
including commas).
ICMPDU 1 Controls whether ICMP Destination Unreachable
messages will be processed. Values are:
0=DU messages not transmitted
1= DU messages not transmitted in response to specific
events
2= DU message with code 2 will be transmitted in case of
specific events
ICMPRED 0 Controls whether ICMP Redirect messages will be
processed. Values are:
0 = Redirect messages will neither be transmitted nor
received Redirect messages will be supported
1 = Redirect messages will not be transmitted, but
received Redirect messages will be supported per RFC
1122
INTER_DIGIT_TIMEOUT 5 This is the timeout that takes place when user stops
inputting digits. The timeout is treated as digit collection
completion, and when it occurs, the application sends out
an invite. Range in seconds of 1 to 10.
IPADD 0.0.0.0 IP Address of the telephone. Range is 7 to 15 ASCII
characters (less than the default string length) defining
one IP Address in dotted-decimal format.
L2Q 0 Requests 802.1Q tagging mode (auto/on/off). Values are:
0 = auto
1 = on
2 = off
L2QAUD 6 Layer 2 audio priority value. Range from 0 to 7.
L2QSIG 6 Layer 2 signaling priority value. Range from 0 to 7.
Table 11: 9600 Series SIP IP Telephones Customizeable System Parameters (continued)
Parameter Name Default
Value
Description and Value Range
8 of 21