Filter
Top Products
Administering Options for the 9600 Series SIP IP Telephones
Issue 2 December 2007 77
DOT1XEAPS MD5 Specifies the EAP authentication method(s) to be used
with IEEE 802.1X. Comma-separated list of key words
defining EAP methods. In SIP Release 2.0, this value is
restricted to a single EAP method. Valid values are either
"MD5" or "TLS".
DOT1XSTAT 1 IEEE 802.1X status. Enables/disables IEEE 802.1X
function and, if enabled, additionally defines reaction on
received multicast or unicast EAPOL messages. Valid
values are:
0 = Supplicant operation disabled.
1 = Supplicant operation enabled, but responds only to
received unicast EAPOL messages.
2 = Supplicant operation enabled, responds to received
unicast and multicast EAPOL messages.
DSCPAUD 46 Differentiated Services Code Point for audio. Values
range from 0 to 63.
DSCPSIG 34 Differentiated Services Code Point for signaling. Values
range from 0 to 63.
DSTOFFSET 1 Used for daylight saving time calculation in hours. Values
range from 0 to 2.
DSTSTART 2Sun
Mar2L
Used to identify start date for automatic change to
Daylight Saving Time. Default string length with a format
of either odddmmmht or Dmmmht, where:
o = one character representing an ordinal adjective of "1"
(first), "2" (second), "3" (third), "4" (fourth) or "L" (last)
ddd = 3 characters containing the English abbreviation
for the day of the week
mmm = 3 characters containing the English abbreviation
for the month
h = one numeric digit representing the time to make the
adjustment, exactly on the hour at hAM (0h00 in military
format), where valid values of h are "0" through "9"
t = one character representing the time zone relative to
the adjustment where "L" is local time and U is universal
time
D = one or two ASCII digits representing the date of the
month from "1" or "01" to "31", or the character "L", which
means the last day of the month)
Table 11: 9600 Series SIP IP Telephones Customizeable System Parameters (continued)
Parameter Name Default
Value
Description and Value Range
4 of 21