Filter
Top Products
Administering Telephone Options
74 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0
!
Important:
Important: PROCPSWD is likely stored on the server “in the clear” and is sent to the
telephone in the clear. Therefore, do not consider PROCPSWD as a
high-security technique to inhibit a sophisticated user from obtaining access to
local procedures.
Administering PROCPSWD limits access to all local procedures, including
VIEW. VIEW is a read-only Craft option that allows review of the current
telephone settings.
Table 11: 9600 Series SIP IP Telephones Customizeable System Parameters
Parameter Name Default
Value
Description and Value Range
AGCHAND 1 Automatic Gain Control status for handset. Values are
0=disabled, 1=enabled.
AGCHEAD 1 Automatic Gain Control status for headset. Values are
0=disabled, 1=enabled.
AGCSPKR 1 Automatic Gain Control status for speaker. Values are
0=disabled, 1=enabled.
AUDASYS 3 Globally controls audible alerting. Values range from 0
through 3. Value 0 or 2=audible alerting off. Value 1 or
3=audible alerting on.
AUDIOENV 0 Audio environment selection index. Values range from 0
through 191.
AUDIOSTHD 0 Headset sidetone setting. Values are:
0 = Nominal
1 = -3dB below nominal
2 = -9dB below nominal
3 = -15dB below nominal
4 = -30dB below nominal (essentially no sidetone)
5 = 10dB above nominal.
AUDIOSTHS 0 Handset sidetone setting. Values are:
0 = Nominal
1 = -3dB below nominal
2 = -9dB below nominal
3 = -15dB below nominal
4 = -30dB below nominal (essentially no sidetone)
5 = 10dB above nominal.
AUTH 0 Authentication flag for settings file download. Values are:
0=secure setting file download is not required
1=secure setting file download is required
BAKLIGHTOFF 120 Number of minutes without display activity to wait before
turning off the backlight. Values range from zero (never
turn off) through 999 minutes (16.65 hours).
1 of 21