Filter
Top Products
Administering Telephone Options
102 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0
Basic Optional System Name The Host Name sent to the DHCP server in
DHCP option 12.
Basic Optional System Capabilities Bit 2 (Bridge) will be set in the System
Capabilities if the telephone has an internal
Ethernet switch. If Bit 2 is set in Enabled
Capabilities then the secondary port is
enabled.
Bit 5 (Telephone) will be set in the System
Capabilities. If Bit 5 is set in the Enabled
Capabilities than the telephone is registered.
Basic Optional Management Address Mgmt IPv4 IP Address of telephone.
Interface number subtype = 3 (system port).
Interface number = 1.
OID = SNMP MIB-II sysObjectID of the
telephone.
IEEE 802.3
Organization
Specific
MAC / PHY
Configuration / Status
Reports autonegotiation status and speed of
the uplink port on the telephone.
TIA LLDP MED LLDP-MED
Capabilities
Media Endpoint Discovery capabilities = 00-33
(Inventory, Power-via-MDI, Network Policy,
MED Caps).
TIA LLDP MED Network Policy Tagging Yes/No, VLAN ID for voice, L2 Priority,
DSCP Value.
TIA LLDP MED Inventory – Hardware
Revision
MODEL - Full Model Name.
TIA LLDP MED Inventory – Firmware
Revision
BOOTNAME.
TIA LLDP MED Inventory – Software
Revision
APPNAME.
TIA LLDP MED Inventory – Serial
Number
Telephone serial number.
TIA LLDP MED Inventory –
Manufacturer Name
Avaya.
TIA LLDP MED Inventory – Model
Name
MODEL with the final Dxxx characters
removed.
Table 13: LLDPDU Transmitted by 9600 Series SIP IP Telephones (continued)
Category TLV Name (Type) TLV Info String (Value)
2 of 3