Filter
Top Products
Communication Manager Administration
42 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0
Conferencing Call Considerations
Unlike 9600 H.323 IP Telephones, the 9600 Series SIP IP Telephones conference operation is
controlled locally by the phone and is not affected by the settings Abort Conference Upon
Hang-up, No Dial Tone Conferencing, Select Line Conferencing and Toggle Swap, on page 7 of
the system-parameters features screen.
Telephone Administration
Table 7 summarizes the calling features available on 9600 Series SIP IP Telephones. Some
features are supported locally at the telephone, while others are only available with Avaya SIP
Enablement Services and Communication Manager with OPS.
The features shown in Table 7
can be invoked at the phone either directly or by selecting a
CM-provisioned feature button. Communication Manager automatically handles many other
standard calling features via OPS such as call coverage, trunk selection using Automatic
Alternate Routing (AAR), or Automatic Route Selection (ARS), Class Of Service/Class Of
Restriction (COS/COR), and voice messaging. Details on feature operation and administration
can be found in the Avaya Extension to Cellular and OPS Installation and Administration Guide
(Document Number 210-100-500). The Avaya SIP solution configures all SIP telephones in
Communication Manager as OPS.
Table 7: 9600 Series SIP IP Telephone Release S2.0 Feature Support
Feature
Delivered by
Telephone
CM Feature
Button/FNU
Avaya Communication
Manager
3-Way Conferencing X
(non-Avaya
environment)
6-way Conference
Bridge
X
Automatic Call Back/
Cancel
FNU
Call Forward All Calls
FNU
Call Forward Busy/
Don’t Answer
X
(non-Avaya
environment)
FNU
1 of 3