Filter
Top Products
Administering Telephone Options
106 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0
● The telephone will un-register if it is a visiting user telephone. But that telephone will
become registered inactive if it is the primary telephone.
Set the VU_MODE configuration parameter value in the settings file to determine the visiting
user login routine. VU_MODE determines whether the phone will support Visiting User
capabilities as follows:
● If the VU_MODE value is zero (Off) the telephone is considered a non-VU phone. This is
the default value and the value associated with the user's "home" phone. The inactivity
timer is not applied when VU_MODE is 0.
● If the VU_MODE value is 1 (Optional), the telephone presents the user with the Login
Screen with a Primary Phone yes/no toggle field, for the user to designate whether the
telephone is that user's primary phone. If the user selects "yes", then the phone operates
as a non-visiting user telephone and the inactivity timer is not applied. If the user selects
"no", then the telephone operates in the visiting user mode where an inactivity timer will log
the user off after a predetermined time.
● If the value is 2 (Forced), the telephone is always in the visiting user mode and the
inactivity timer is always applied.
Emergency Number Administration
Set the PHNEMERGNUM configuration parameter in the settings file to assign an emergency
telephone number. This telephone number will be automatically dialed whenever the Emerg
softkey is selected on the Login screen, or the Phone screen, or when the user chooses the Yes
softkey on an Emergency pop-up screen.
The local proxy routes emergency calls from a user at a visited phone so that the local
emergency number is called. When PHNEMERGNUM is administered, using the Emerg
softkey overrides the SPEAKERSTAT parameter setting or a user-selected referred audio path.
This means that the even if the Speakerphone is disabled it is the default transducer when the
user presses the Emerg softkey.