Filter
Top Products
Administering Options for the 9600 Series SIP IP Telephones
Issue 2 December 2007 83
LOG_CATEGORY Comma-separated list of keywords in standard string
format representing logging categories (SW modules or
functions to be included in lower level logging). Logging
implementation blocks all traces at level "Warning" or
lower, unless the category corresponding to a given trace
is enabled. If the LOCAL_LOG_LEVEL is set to
"Warning" or lower, this parameter would enable
low-level traces from the adaptors or manager as
indicated. Applies to all logging mechanisms (syslog and
local log). Example: "ALSIP, SESSION" enables debug
level traces from the ALSIP adaptor and Session
manager.
LOGOS " " (Null) List of custom logo definitions used as background on
display. Each logo tuple is delimited by commas. Each
logo tuple contains logo label (verbatim label displayed
on the screen) and logo URL. Logo label and URL are
separated from one another by a '='. String maximum of
1023 characters.
LOGSRVR " " (Null) Syslog server IP or DNS address. 0 to 255 characters:
zero or one IP Addresses in dotted decimal or DNS name
format.
MEDIAENCRYPTION 9 This parameter sets the cryptosuite and session
parameters for SRTP. The parameter can have one or
two of the following nine values (separated by commas
without any intervening spaces):
1=aescm128-hmac80
2=aescm128-hmac32
3=aescm128-hmac80-unauth
4=aescm128-hmac32-unauth
5=aescm128-hmac80-unenc
6=aescm128-hmac32-unenc
7=aescm128-hmac80-unenc-unauth
8=aescm128-hmac32-unenc-unauth
9=none
MSGNUM " " (Null) Voice mail system telephone/extension number.
Specifies the number to be dialed automatically when the
telephone user presses the Message button.
MTU_SIZE 1500 Maximum Transmission Unit size. Range is 1496 or 1500
only octets.
Table 11: 9600 Series SIP IP Telephones Customizeable System Parameters (continued)
Parameter Name Default
Value
Description and Value Range
10 of 21