Filter
Top Products
Introduction
12 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0
● RTCPMON
● RTCPMONPORT
● SIP_MODE
● SIPCONFERENCECONTINUE
● TLSSRVRID
● VU_MODE
● VU_TIMER
● WMLEXCEPT
● WMLHOME
● WMLIDLETIME
● WMLIDLEURI
● WMLPORT
● WMLPROXY
The following parameters have been modified or renamed:
● Parameters PHYxDUPLEX and PHYxSPEED were combined. PHY1SPEED has been
renamed to PHY1_OPERATIONAL_MODE. This parameter now includes the current
duplex mode. PHY2SPEED has been renamed to PHY2_OPERATIONAL_MODE. This
parameter now includes the current duplex mode.
● The OUTBOUND_SUBSCRIPTION_REQUEST_DURATION default value has been
changed from 17280000 to 86400 seconds. This parameter can now be set through the
settings file.
● The dimensions for SNTP_SYNC_INTERVAL and
SNTP_SYNC_RANDOMIZATION_INTERVAL have changed from seconds to minutes.
● EXCHANGE_CONTACTS_ENABLED has been renamed to
USE_EXCHANGE_CONTACTS.
● EXCHANGE_CALENDAR_ENABLED has been renamed to
USE_EXCHANGE_CALENDAR.
● The default value definition of ENABLE_G726 has changed from 0 to 1.
● The default values and sidetone definitions of the audio parameters AUDIOSTHD and
AUDIOSTHS
have been modified.
● WAIT_FOR_REGISTRATION_TIMER can now be set through the settings file.
The following configuration parameters are no longer valid and have been removed:
● PHY1DUPLEX
● PHY2DUPLEX
● INTER_DIGIT_DIALING_TIMEOUT_DURATION