Filter
Top Products
Server Administration
70 4600 Series IP Telephone LAN Administrator Guide
Verify the Scope Option, 176 46XXOPTION
Use the following procedure to verify the scope option:
1. Select Scope under DHCP OPTIONS.
2. In the Active Options: scroll list, click 176 46XXOPTION.
3. Click the Value button.
4. Verify that the Value String box contains the correct string from DHCP Generic Setup
on
page 62.
If not, update the string and click the OK button.
Verify the Global Option, 176 46XXOPTION
Use the following procedure to verify the global option:
1. Select Global under DHCP OPTIONS.
2. In the Active Options: scroll list, click 176 46XXOPTION.
3. Click the Value button.
4. Verify that the Value String box contains the correct value from DHCP Generic Setup
on
page 62. If not, update the string and click the OK button.
Windows 2000 DHCP Server
This section describes the configuration of the DHCP server in Windows 2000
®
.
Verifying the Installation of the DHCP Server
Use the following procedure to verify whether the DHCP server is installed.
1. Select Start-->Program-->Administrative Tools-->Computer Management.
2. Under Services and Applications in the Computer Management tree, find DHCP.
3. If DHCP is not installed, install the DHCP server. Otherwise, proceed directly to
Creating and Configuring a DHCP Scope
for instructions on server configuration.