Filter
Top Products
Server Administration
118 4600 Series IP Telephone LAN Administrator Guide
If the Automatic Backup option is set to No, Speed Dial data, Options and Parameter settings
are not saved. However, the user can force a one-time backup via the appropriate option. See
Chapter 8 of the 4630 IP Telephone User Guide for information. Restoring backed-up data is a
separate user option, also covered in Chapter 8 of the 4630 IP Telephone User Guide.
Note:
Note: For specific error messages relating to Backup/Restore, see Table 17: Possible
Error Messages During 4610SW, 4620/4620SW, 4621SW, 4622SW, 4625SW,
and 4630/4630SW Backup/Restore on page 148.
Call Log Archive
Automatic archiving of the Call Log occurs when:
● The Call Log Automatic Archive option setting is Yes, and
● The Call Log is more than 50% filled with unarchived entries. Or, when a new (unarchived)
log entry occurs within two hours of the last archive (whichever occurs first).
Call Log Archive automatically saves applicable Call Log entries. When the Call Log Automatic
Archive option on a 4630/4630SW IP Telephone is set to Yes and the FTPSRVR is specified,
the FTP APPE command attempts to save all call log contents to the FTP server. The FTP
Server is the FTPSRVR value in the FTPDIR directory path. The file 4630calllog.txt saves the
data. The System Administrator can optionally specify FTPSRVR and/or FTPDIR by network
administration. However, the telephone user can also specify these values. Chapter 8 of the
4630/4630SW IP Telephone User Guide covers user specification. Automatic backup occurs
whenever the user executes a Save command on a Speed Dial or Options/Parameter screen.
Note:
Note: For specific error messages relating to Archiving, see Table 17: Possible Error
Messages During 4610SW, 4620/4620SW, 4621SW, 4622SW, 4625SW, and
4630/4630SW Backup/Restore on page 148.