Filter
Top Products
Server Administration
106 4600 Series IP Telephone LAN Administrator Guide
PHNCC 1 Telephone country code. The administered international
country code for the location of the serving
MultiVantage™ server. Range: 1-3 digits, from “1”
to “999.”
PHNDPLENGTH 5 Telephone dial plan length. The length of the
administered dial plan for the serving MultiVantage™
server. Range: 1 or 2 digits, from “3” to “10.”
PHNIC 011 Telephone international access code. The digits dialed to
access public network international trunks from the
serving Multi-Vantage™ server. Range: 1-4 digits.
PHNLD 1 Telephone long distance access code. The digit dialed to
access public network long distance trunks from the
serving MultiVantage™ server. Range: 1 digit or
" " (Null).
PHNLDLENGTH 10 Length of national telephone number. The number of
digits in the longest possible national telephone number
for the serving Avaya Media Server’s location. Range:
1 or 2 digits, from “5” to “15.”
PHNNUMOFSA 3 Number of Session Appearances for SIP telephones.
Valid values are a single ASCII numeric digit, 1 to 5. The
number of session appearances that will be supported
on phones with larger displays. The 4602 and 4602SW
always have 2 session appearances.
PHNOL 9 Outside line access code. The character(s) dialed to
access public network local trunks from the serving
Avaya Media Server. Range: 0-2 dialable characters,
including " " (Null).
PHY1STAT 1 Ethernet line interface setting (1=auto, 2=10Mbps
half-duplex, 3=10Mbps full-duplex, 4=100Mbps
half-duplex, 5=100Mbps full-duplex).
PHY2PRIO 0 Layer 2 priority value for frames received on or
forwarded to the secondary Ethernet interface. Set this
parameter only when VLAN separation is enabled.
Values are from 0-7.
PHY2VLAN 0 VLAN identifier used by frames received on or forwarded
to the secondary Ethernet interface. Set this parameter
only when VLAN separation is enabled. Value is 1-4
ASCII numeric digits from “0” to “4094.” Null is not a valid
value, nor can the value contain spaces. If this value is
set by LLDP using the Port VLAN ID TLV value, it will not
change regardless of settings from other sources. For
more information, see Parameter Data Precedence
.
Table 10: 4600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name Default Value Description and Value Range
6 of 9