Filter
Top Products
Administering Options for the 4600 Series IP Telephones
Issue 4 August 2006 107
PHY2STAT 1 Secondary Ethernet interface setting
(0=Secondary Ethernet interface off/disabled, 1=auto,
2=10Mbps half-duplex, 3=10Mbps full-duplex,
4=100Mbps half-duplex, 5=100Mbps full-duplex).
PROCPSWD " " (Null) Text string containing the local (dialpad) procedure
password (Null or 1-7 ASCII digits).
PROCSTAT 0 Local (dialpad) Administrative Options status
(0=all Administrative Options are allowed, 1=only VIEW
is allowed).
PUSHCAP 222 Push capabilities - audio receive push value (hundreds),
Web push value (tens), or Top Line value. Any values
other than combinations of 0, 1, and/or 2 are treated as
"0" (disabled). Values are 000 to 999, defined as:
0 = Push disabled.
1 = Normal only push allowed.
2 = Normal and/or barge-on push allowed.
For example, if the value is “222” everything is allowed, if
the value is “111” no barge-in is allowed, and the value
200 signifies both a normal and barge-in audio push, but
not a Web or Top Line push.
PUSHPORT 80 Destination TCP port for the telephone’s HTTP server.
Valid values are: 80 to 65535.
REGISTERWAIT 3600 SIP Re-registration Interval. The SIP registration
expiration interval (in seconds) sent to the SIP registrar
during registration. Valid values are 1 to 5 ASCII numeric
characters from 0 to 65535. Null (“”) is not a valid value,
and the value may not contain spaces.
RTCPMON " " (Null) Text string containing the 4-octet IP address of the RTCP
monitor currently in use.
RTCPMONPORT 5005 The port used to send RTCP information to the IP
address specified in the RTCPMON parameter.
SIPDOMAIN “ ” (Null) SIP Domain Name. Valid values are 0 to 255 ASCII
characters. Null (“”) is a valid value, but the value may
not contain spaces. The domain name used in the
Contact header for SIP registration. For example, if the
SIP domain is “avaya.com”, the Contact header sent to
the SIP registrar for extension 1234 would be
sip:1234@avaya.com.
Table 10: 4600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name Default Value Description and Value Range
7 of 9