Filter
Top Products
The View Administration Option
Issue 4 August 2006 141
File server nnn.nnn.nnn.nnn.nnnnn Up to 21 ASCII characters: the IP
address and port of last file server
used successfully during initialization
(“0.0.0.0” if no HTTP or TFTP file
server was used successfully).
Call server nnn.nnn.nnn.nnn.nnnnn Up to 21 ASCII characters: IP
address and port of call server
currently in use, if any, otherwise
“0.0.0.0”.
802.1X pass-thru mode
pass-thru with Logoff
Supplicant mode
If system parameter DOT1X = 0
If system parameter DOT1X = 1
If system parameter DOT1X = 2
Group nnn Up to 3 ASCII numeric characters:
GROUP.
Protocol cccccccc
filename.ext
ccccccc Ethernet
filename.ext
cccccccccc
cccccccccc
Up to 8 ASCII characters, depending
on the system-specific signaling
protocol (H.323, SIP, etc.) currently
being used.
Up to 16 ASCII characters: name of
the application code file currently
stored in the telephone.
From 2 to 7 ASCII characters, either
“100Mbps”, “10 Mbps”, or “No”.
Up to 16 ASCII characters. Name of
the boot code file currently stored in
the telephone.
Up to 10 ASCII characters. DSP
code version.
Up to 10 ASCII characters. DSP
hardware version, displayed only if a
DSP hardware version identifier is
available.
Build cccccccccc Build identifier. Up to 10 ASCII
characters.
Table 15: Viewing Parameter Values (continued)
Name System Value Format
2 of 2