Filter
Top Products
Advanced features
328
soft key invokes a password input screen. The password must be
correctly entered to cancel the screensaver.
If you enable the screensaver with no password mode:
• Any user interaction, key presses, mouse movement, or incoming call
cancels the screensaver (without requiring a user password). This
includes pressing the Unlock context-sensitive soft key.
• Incoming IMs do not cancel the screensaver.
• The programmed keys of attached Expansion Module(s) are cleared
until the screensaver is deactivated. If you have logged on to the
IP Deskphone, you are not logged out, but the line key labels clear
and are inactive until the screensaver is deactivated.
If you reboot the IP Deskphone when there is an active screensaver:
• If you have enabled autologin, then the screensaver remains active
after the IP Deskphone reboots and completes the login.
• If you have not enabled autologin, then the screensaver setting
remains enabled, but not active, after you log back into the
IP Deskphone manually.
If you enable the screensaver with a password protected mode:
• User interaction, key presses, and mouse movements do not cancel
the screensaver.
• An incoming call displays showing caller ID and allows you to answer
the call. You cannot make outgoing calls except an emergency call,
and cannot view IMs or the Friends list until you unlock the
IP Deskphone. An Unlock context-sensitive soft key appears on the
screen. You can unlock the IP Deskphone after answering the call.
• Pressing the Unlock context-sensitive soft key prompts you to enter
the password for the screensaver. The primary user line key is
displayed (but not active) during the password prompt to give an
indication about whose password is in use.
• Picking up the handset and dialing digits activates the line function
display for emergency calls only. If you try to place an outgoing call, a
message is displayed and the screensaver starts again.
• If you make an emergency call while the screensaver is active, the
call is placed using the primary user.