Filter
Top Products
Configuring the Avaya 1140E IP Deskphone
123
Analog Terminator Adapter for analog
(500/2500-type) telephone or fax machine
SIP Software Release 3.x supports the Analog Terminator Adapter (ATA)
which is connected using the USB port. An analog (500/2500-type)
telephone or fax machine can be connected to the ATA to convert the
IP Deskphone to an analog system. The ATA is treated as an USB
headset device by the IP Deskphone.
SIP Software 3.x supports On hook/Off hook and dial pad key events for
HID support to allow the attached device to make outgoing calls directly
without using the key pad on the IP Deskphone. If Calling Line ID (CLID)
of the far-end is available, then the information is sent to the attached
analog device. An analog (500/2500-type) telephone or fax machine that
supports Calling Line ID displays the information on the screen.
Audio Processing Same as the wired headset. Both
headsets support Wideband audio. The
IP Deskphone selects to use 16KHz
audio to match the audio characteristics
of the headset.
Table 14: Third-party USB headset with HID support features
(Part5of5) (Part5of5)
Feature Description