Filter
Top Products
You can also program up to four other local area codes. These are area
codes that do not require dialing a “1”before them. After storing these area
codes, if you receive a call from one of these area codes, the screen
displays the ten digits (three digits of area code plus seven digits of phone
number). When you press , the phone dials ten digits, without
inserting a “1” before the area code. If you receive a call from an area code
not programmed in the phone, you will see 10 digits on the screen (the
area code and the phone number). The phone will automatically dial “1”
before the number when you press .
If you try to use the Display Dial feature,but your call cannot be completed
unless you dial “1”before the number, follow the steps below:
1 Press < or > to locate the number you want to call.
2 Press U.
3 Press > until the screen displays DIAL 1+.
4 Select DIAL 1+ to dial the number.
Deleting Call Records from Call History
NOTE: Once you delete a call from call history, you cannot retrieve the
call information.
Deleting a Specific Call Record
1 Press < or > to scroll to the record you want to remove.
2 Press U while the number of calls is displayed.
3 Use the softkey to select DELETE. The handset beeps and deletes
the call record. The screen displays DELETED.
Deleting All Call Records
1 Press < or > to display the number of calls in the call history.
2 While the number of calls is displayed, press U.
3 The screen displays REMOVE ALL?. Select YES to remove all calls.
4 The screen displays ARE YOU SURE?. Select YES to remove all
calls. The screen displays NO CALLS,and the information is
permanently deleted.
39
CALLER ID OPERATION
9355_book_1ATT 7/12/99 2:25 PM Page 39