Filter
Top Products
Talking Caller ID
You can record personalized announcements (Talking Caller ID) to be
played from the speaker at the base each time a call is received from a
telephone number or call type you program.
For example, you could record an Talking Caller ID announcement to say
“Mom and Dad”each time you receive a call from your parents’ telephone
number.
You can program up to 10 Talking Caller ID announcements. Each
announcement can be up to five seconds long.
Recording a Talking Caller ID (LOCAL) Announcement
1 Press U.
2 Use the softkey to select DIR.
3 Select ANS SYS.
4 Select LOCAL.
5 Select ADD. The screen displays ENTER NUMBER:.
6 Use the keypad to enter the digits (up to 24) of the incoming phone
number for LOCAL,then select DONE
— OR —
Press >, then select DONE for PRIVATE CALL information
— OR —
Press >>,then select DONE for UNKNOWN CALL information.
7 Select RECORD.
8 Using the handset, record a LOCAL announcement up to five
seconds long, that you will hear at the base when you receive a
call from the number or call type you programmed.
9 Select STOP when you are finished recording. The system plays
the announcement you just recorded.
10 The screen displays the number or call type matched to the LOCAL
announcement. To change the announcement,select RE-RECORD
— OR —
Select DONE. If you have not recorded all Talking Caller ID (LOCAL)
Announcements, begin again at Step 4.
NOTE: You do not need to enter the “1”when storing numbers you
usually dial with a 1 prefix.
16
FEATURE SETUP
9355_book_1ATT 7/12/99 2:25 PM Page 16