Filter
Top Products
35
Setting the Clock
1 Connect with the answering system.
2 Press *8. You will hear the current day, followed by “To change,
press 6 or 4. To change the hour, press 8.”
3 Press 4 to move back a day, or 6 to move forward a day.
4 Press 8. The system announces the current hour setting, followed
by “To change, press 6 or 4. To change the minutes, press 8.”
5 Press 4 to decrease or 6 to increase hour.
6 Follow the same procedure to change the minutes setting.
7 The system announces the new time setting, then beeps twice to
indicate it is ready to accept a command.
Remote ON/OFF
Reviewing ON/OFF Status
1 Connect with the answering system.
2 Press 0. The system announces the current status, then beeps
twice and is ready to accept a command.
Turning System Off
1 Connect with the answering system.
2 Press *0. The system announces “The machine is off,” then
beeps twice to indicate it is ready to accept a command.
Turning System On
When the system is off, it answers after 10 rings, and announces “The
machine is off,” then beeps twice to indicate it is ready to accept a
command. Press *0. The system announces “The machine is on,”then
beeps twice.
Recording a Message When System is Off
Press # when the system answers after 10 rings. The system will beep to
signal you to begin speaking.
ANSWERING SYSTEM OPERATION
At Cordless Handset or Touch Tone Phone
9355_book_1ATT 7/12/99 2:25 PM Page 35