Filter
Top Products
Appendix A
Alti-IP 600 Manual 43
Line Park
During a call:
1) Press #51 or Line Park soft key (if configured)
2) Enter two-digit Line Park line.
The LED for Line Park soft key will be lit up and turns off when
the parked call is picked up, the caller hangs up, or the call is
routed to voice mail.
Mute
While on a call with Speaker on
:
1) Press SPKR/MUTE button.
2) To disengage mute, press SPKR/MUTE button again.
Program Soft
Key
1) Press **6, then ENTER button; scroll to desired
programmable key to configure; enter appropriate digits for the
speed dial number or feature code.
Reboot 1) Press **3, then ENTER button
Redial
Phone is onhook
1) Press REDIAL button.
2) Use !/" to scroll to the desired entry. (! scrolls to previous
entry, " scrolls to first entry.)
3) Press SPRK/MUTE button or raise handset.
• Redial up to 16 last calls
• Redial up to 32 digits.
Release
For a connected call:
1) Press RELEASE to hang up the call.
Restore
Default
Settings
1) Press **7, then ENTER button, **2, then ENTER button
Ring Tones 1) Press **6, then ENTER button; scroll to SELECT RING.
Soft Key*
• BLF
• Feature
Code
• Speed Dial
• Phone
Setting
1) Press SOFT KEY 1-10 to initiate one of the following
functions (Busy Lamp Field, AltiServ feature code,speed dialor
Phone Setting) pre-assigned by the System Administrator.
Note: Lower left SOFTKEY is set upas FLASH by default. Only
this key can be configured for FLASH. All other SOFT KEYS
are set up as Phone Setting by default.
Speaker
To use the speakerphone:
1) Press the SPKR button