Filter
Top Products
Alti-IP 600 Manual 24
4. Press " (DOWN key) to disable DHCP.
Configuring IP Settings
Use these guidelines when manually configuring the IP settings:
• Ensure the default gateway IP address in on the same subnet as the host
IP address.
• When inputting IP addresses into the Alti-IP 600, use the * keytoenter
periods. For example, “209.120.12.8” would be inputted as
“209*120*12*8”.
Assigning a Local IP Address
The IP address is the unique logical address identifying each host computer
on a TCP/IP network. An IP address is a 32-bit number expresses as four
decimal numbers from 0 to 255 separated by periods.
To assign an IP address, use the following steps:
1. Press **7+ ENTER button.
2. Use !/" to select Network,thenpresstheENTER button.
3. Scroll to Local Address.
4. Press the ENTER button or#(FORWARD key).
5. Use the buttons on the dial pad to enter a new IP address, using the *
key to enter periods. Use the $(BACK key) to correct any mistakes.
6. Press the ENTER button.
Assigning a TFTP Server
The default TFTP Server is set to 0.0.0.0.
To assign the TFTP server, use the following steps:
1. Press **7.
2. Use !/" to select System,thenpresstheENTER button.
3. Scroll to TFTP Server.
4. Press ENTER button or#(FORWARD key).