Filter
Top Products
Appendix A
Alti-IP 600 Manual 41
IP Phone Boot Messages
The following messages may be displayed in the LCD when booting the
Alti-IP 600H/600PH:
User Reference
Basic Phone Operation
* indicates a normal operating mode phone feature, which is only available after
registering the Alti-IP 600 with the phone server and logged in as an extension.
Message Definition
CHECK FW Checking firmware.
CHECK MEMORY Checking memory.
INIT NETWORK Initializing network.
LOAD FAILED Failure to load the image into memory.
NETWORK FAILED. Network initialization failed.
TFTP FAIL! Failure downloading TFTP.
UPDATE FAILED. Firmware update failed.
UPDATE OK Firmware update successful.
update APP(S1) Appears when Boot Download is set to TRUE. The Alti-
IP 600H/600PH will show this message when it is
rebooted.
FUNCTION KEY SEQUENCE
Auto Answer 1) Press **6, then ENTER button.
2) Use the navigation buttons to enable/disable Auto
Answer mode, set number or seconds to ring before
answering (1-20), and select from speaker or headset as
the Auto Answer device.