Filter
Top Products
Alti-IP 600 Manual 33
Hold Places an active call on
hold.
• When multiple Call Waiting
Feature is enable at the extension,
the use can put multiple incoming
calls on hold and retrieve using the
phone’s !/"(UP/DOWN keys)
and ENTER button.
• Pressing HOLD while onhook will
retrieve last hold call.
• Supports up to 9 hold calls.
Intercom
(ICOM)
Connects you directly to
the callee’s intercom after
exactly one ring.
• Feature does not require special
configuration to work.
Line Park Parks acall ona Line Park
line using a #51 <line
number> or a pre-
programmed key.
• Go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to Line
Park.
• The LED for Line Park soft key
will be litup and turns off when the
parked call is picked up, the caller
hangs up, or the call is routed to
voice mail.
Mute While on a call, mutes
conversation.
• Feature does not require special
configuration to work.
Program Soft
Keys
Associates Soft Key with
a speed dial number or
feature code that can be
configured directly on the
IP Phone.
• Go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to Phone
Setting. The user will be able to
configure this key directlyfrom the
IP Phone by pressing **6
ENTER.
Redial Redials the last number
dialed.
• Feature does not require special
configuration to work.
• Redialsuptolast16calls.
• Redialsupto32digits.
Release Releases a call from the
connected state.
• Feature does not require special
configuration to work.