Filter
Top Products
Alti-IP 600 Manual 18
Important:Also, the user should not use the VM option to logon the
Alti-IP 600.
Restoring Default Settings
To automatically restore the original default settings for the Alti-IP 600:
1. Press **7,thenpresstheENTER button
2. Press **2,thenpresstheENTER button.
Rebooting the Alti-IP 600
To reboot the Alti-IP 600, press * * 3, then press the ENTER button.
Note: When the Alti-IP 600 is rebooted, the AltiWare IP address setting
is set back to the original configuration.
Configuring “Phone Setting” Soft Keys
When the soft key is set to “Phone Setting” (in the IP Phone Configuration
window of AltiAdmin), the IP Phone user can configure the soft key to
store a speed dial number or feature code.
To configure a soft key with phone setting enabled:
1. Press **6,thentheENTER button.
2. Scroll to the program key to configure.
3. Enter the appropriate digits for the speed dial number or feature code.
The digits will be automatically dialed when this function key is pressed.
Dialing an IP Number Directly from the Alti-IP
600
To dial an IP number directly from the Alti-IP 600 phone set, enter the IP
address using the * key to enter periods followed by the # key.
Notes:
• This only works when the Alti-IP 600 is operating in basic mode.