AltiGen comm 600 Telephone User Manual


 
Alti-IP 600 Manual 22
Network Settings
TFTP Server System>TFTP Server
{Save TFTP Server IP
Address}
Sets the TFTP server IP address for
updating firmware.
Boot
Download
System>Boot
Download
After firmware image upgrade,
submenu changes to {No}. Used
mainly for upgrading or
troubleshooting. On the next boot,
the phone will download the new
firmware from the TFTP server, if
set to [YES].
Note: Make sure to launch
TFTP32.exe.
When downloading, the
phone key pad is disabled.
Version
Information
System>Version
Info {Read only, version
information}
Indicates the version number of the
IP Phone.
Setting Menu Path {Sub Menu} Description
Enable DHCP Network>Enable
DHCP
Set YES or NO to indicate whether
Dynamic Host Configuration
Protocol (DHCP) is beingused by the
IP phone to retrieve new IP address
upon boot up.
Local
Address
Network>Local
Address
Sets the IP phone’s local address;
onlyshowsifDHCPisdisabled.
Network
Mask
Network>Network
Mask
Sets the IP phone’s network mask;
onlyshowsifDHCPisdisabled.
Gateway Network>Gateway Sets the Gateway IP address.
Enable
Gatekeeper
Network>Enable/
Disable
GateKeeper
SetwhetherGateKeeperis enabledor
disabled.