Filter
Top Products
TROUBLESHOOTING [60]
www.uniden.com
TROUBLESHOOTING
Resetting the UIP165P
There are two ways to reset the UIP165P: a power cycle restarts the unit, and a hard reset restores the
unit to factory defaults.
Power Cycle
Simply unplug the telephone UIP165P and plug it in again. This restarts the UIP165P and reloads the
configuration file.
Hard Reset
A hard reset restores the UIP165P to factory defaults. All configuration changes will be lost.
A: Unplug the UIP165P's AC adapter.
B: Insert a pin or bent-out paper clip into the RESET hole on the rear of the UIP165P and push the reset
button.
C: While holding the reset button pushed in, reconnect the UIP165P's AC adapter.
D: Hold the reset button for ten seconds and then release it. This sets the UIP165P main base back to
factory defaults.