Filter
Top Products
[43] USING ONE TOUCH VOICE MAIL ACCESS
www.uniden.com
USING ONE TOUCH
VOICE MAIL
Using One Touch Voice Mail Access
The UIP165P provides one-touch access to Packet8's voice mail service. Follow the
steps below to program the Packet8 access number into any registered handset(s):
1) Press the MENU soft key. Select the Handset Setup or Base Setup menu, and then
the Edit Voice Mail submenu.
Edit V_mail No.
appears.
2) Enter the Packet8 voice mail access number: **012-0555
3) Press the OK soft key.
To delete the current Voice Mail Access Number, delete all numbers in step2 using
the DELETE soft key and the OK soft key.
When you have messages the New Message LED will flash. To retrieve your messages,
simply press on the handset or soft key on the base. If you have not entered
the access number or it has been deleted,
No Number Stored Store number in Menu
Setup
appears on the handset (or
No Number stored To store number press [MENU]
appears on the base) and you will hear a beep. The phone returns to standby mode.
Resetting the New Message LED
If the LED remains on after you’ve retrieved your messages, you may need to reset
the indicators. With the phone is in standby mode, press and hold find hs on the
base until the paging sound stops (about 5 seconds).
The UIP165P's Voice
Mail Tone is already
configured to work with
Packet8's system. Do not
change the Voice Mail
Tone setting.
note