Filter
Top Products
CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) [54]
www.uniden.com
CALLER ID AND CIDCW
(CALLER ID ON CALL WAITING)
Talk mode
1) From the base
During talk mode, press to review Caller ID record.
From the handset
During talk mode, press the MENU soft key. Use volume up/down to select
Caller ID
, then press the OK soft key.
2) Select the Caller ID message you want to dial (see "Viewing the Caller ID List" on
page 51).
3) When the Caller ID number is located, press the DIAL soft key and the number
will be dialed.
Storing Caller ID records in the Phonebook
Records shown in the Caller ID list can be stored in the phonebook. The phone
number and name of the party on the Caller ID record can be stored in the phone
book without reentry.
1) When the phone is in standby mode, select the Caller ID message to be stored.
Then press the STORE soft key on the base or the EDIT soft key on the handset.
From the handset, then select
Store into PB?
, and then press the OK soft key.
Store/Edit Name
appears. If the Caller ID message is already stored in memory,
you will hear a beep and
This data is already stored !!
appears. The number
will not be stored.
2) To complete the setting, follow the steps 3-8 in "Entering New Phonebook
Entries and Speed Dial Numbers" on page 44-45.
•If the Caller ID message
was received as a private/
unknown number, or the
message does not have
the number, you cannot
store the message in the
phonebook. If it was
received as private/
unknown name, the
message will be stored as
<No Name>.
•If all 100 memory entries
are full, the Caller ID
message will be erased
from Caller ID list when
you store it in the
phonebook.
note