Filter
Top Products
SETTING UP YOUR BROADBAND PHONE [12]
www.uniden.com
SETTING UP YOUR
BROADBAND PHONE
4) Use the included AC adapter to
connect the POWER port to a
100-240 Vac continuous power
outlet.
CAUTION
To avoid risk of fire or
electrical hazard, use ONLY the
included AC adapter!
LEDs flash several times, and the
pwr LED will remain on. If the
UIP165P was properly recognized by Packet8’s network, the link LED will remain on.
Test your connection by making a call with the handset and browsing to a web page
from your PC. If you have any difficulty, see the Troubleshooting section.
See the User Interface Guide at www.uniden.com/voip for more information on
configuring your UIP165P.
5) Place the handset in the cradle with the keypad facing forward.
6) Make sure that the charge LED illuminates. If the LED does not illuminate, check to see
that the AC adapter is plugged in and the handset makes good contact with the cradle
charging contacts.
7) Charge the handset battery pack for at least 15-20 hours before using your new cordless
handset for the first time.