Uniden EXI3226 Cordless Telephone User Manual


 
www.uniden.com
[ 49 ]ADDITIONAL INFORMATION
ADDITIONAL
INFORMATION
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the
following steps.
Case
If the handset or base is exposed
to moisture or liquid, but only
affects the exterior plastic housing.
Action
Wipe off the liquid and use as normal.
If moisture or liquid has entered
the plastic-housing (i.e. liquid can
be heard in the phone or liquid
has entered the handset battery
compartment or vent openings on
the base).
Liquid Damage
Handset:
1. Remove the battery cover and leave it off for ventilation.
2. Remove the battery pack by disconnecting.
3. Leave the battery cover off and the battery pack disconnected for at least 3 days.
4. Once completely dry, reconnect the battery pack and the battery cover.
5. Recharge the handsets battery pack for 20 hours on the base unit before using
the phone.
Base:
1. Disconnect the AC adapter from the base unit, cutting off electrical power.
2. Disconnect the telephone cord from the base unit.
3. Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery
pack to avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause
permanent damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth, TX 76155
1-800-554-3988. Monday through Friday
8 a.m. to 5 p.m. CST