Filter
Top Products
www.uniden.com
[ 45 ]ADDITIONAL INFORMATION
ADDITIONAL
INFORMATION
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset
and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set.
In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code.
1) Remove the handset from the base unit.
2) Press and hold
intercom on the base.
3) While holding
intercom, place the handset on the
base unit. The paging sound stops. Leave the handset
on the base for more than 5 seconds.
A new random security code is set.
note
If the handset battery
pack is completely
discharged or the
battery pack is removed,
the digital security code
will be lost.
If this happens, a new
security code is set
automatically next time
the battery pack is
charged.
• To protect you against
misbilled calls which
might result from your
phone being activated
by other equipment,
the cordless phone
has
AutoSecure
TM
feature electronically
locks your phone
when the handset is
on the base. Also, the
Random Code
TM
digital
security which
automatically selects
one of over 65,000
digital security codes
for the handset and
base.