Filter
Top Products
www.uniden.com
[ 10 ]
note
GETTING STARTED[ 10 ]
Battery use time (per charge)
From fully charged
• Up to seven hours continuous use during talk mode.
• Up to fourteen days when the handset is in the standby mode.
Low battery alert
When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power.
If the phone is not in use, “
Low Battery” appears on the
LCD and none of the keys will operate.
If the phone is in use, “
Low Battery” flashes and the
handset beeps. Complete your conversation as quickly as
possible and return the handset to the base unit for charging.
Cleaning the charging contacts
To maintain a good charge, it is important to clean
the charging contacts on both the handset and base
unit once a month. Use a dry cloth or pencil eraser
to clean. If the contacts become very dirty, using
water only, dampen a cloth to clean the charging
contacts. Then make sure to go back over the
charging contacts with a dry cloth before returning
the handset to the base to charge.
Even when the battery
pack is not being
used, it will gradually
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to the base
unit after each
telephone call.
The handset memory backup can hold Caller ID Memory, Memory Dial, and all settings
stored in memory even if the battery pack is completely discharged.
note
• Standby Mode-
The handset is not in
use, off the base and
line 1 or line 2 has
not been pressed.
A dial tone is not
present.
• Talk Mode-
The handset is off the
base and
line 1 or
line 2 has been
pressed enabling
a dial tone.