Filter
Top Products
www.uniden.com
If you enter a 3-digit area code number in the “Area Code” option, your
local area code does not appear in the Caller ID messages. Do not program this
option, if your calling area requires 10-digit dialing. When reviewing Caller ID
messages, you will see only the local seven digit number. For calls received
from outside your local area code, you will see a full 10-digit number.
1) When the phone is in the standby
mode, press and hold
cid/menu/hold
until the Caller ID setting screen
appears.
2) Press
/int’c or /conf to select “Line 1” or “Line 2”.
3) Press
#/ .
4) Press
/int’c or /conf to select “Area Code”.
5) Press
select/vol/ring.
6) Use the dial buttons (
0 - 9 ) to
enter the 3-digit area code.
7) Press
select/vol/ring. A tone sounds and the displayed area code is entered.
8) Press
cid/menu/hold to complete the setting. Or return the handset to the
base unit. The handset returns to standby mode.
To Enter Your Area Code
Line 1
Line 2
Language :Eng
GETTING STARTED [ 17]
GETTING STARTED
note
If your calling area
requires 10-digit
dialing, do not program
this option.
Auto Talk :Off
CIDCW :On
Area Code :
Auto Talk :Off
CIDCW :On
Area Code :
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use the
delete/flash and number keypad to enter the new area code.
Then press
select/vol/ring. To complete the setting, press
cid/menu/hold or return the handset to the base unit.
Auto Talk :Off
CIDCW :On
Area Code :817
note