Filter
Top Products
www.uniden.com
GETTING STARTED [ 15]
GETTING STARTED
Setting Menu Options
There are four setup options available. They are Caller ID options [AutoTalk,
CIDCW (Caller ID on Call Waiting), Area Code], and Language. See page 17 for
Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing the
line 1 key or the
line 2 key. If the phone rings when AutoTalk is on, simply remove the handset
from the base and the phone automatically answers the call. Or if the handset
is not on the base, press any key on the handset to answer the call. If the
phone rings when AutoTalk is off, you must press the
line 1 key or the line 2 key
to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID
on a call waiting number.
You must subscribe to CIDCW from your phone
company in order to use this feature.
To change your AutoTalk and CIDCW:
1) When the phone is in the standby
mode, press and hold the
cid/menu/hold key until the Caller ID
setting screen appears.
2) Press the
/int’c key or the
/conf key to select “Line 1” or
“
Line 2”.
3) Press the
#/ key. The following screen appears.
4) Press the
/int’c key or the /conf key to move the cursor to the selection
that you would like to change. Press the
select/vol/ring key to toggle between
“
On” and “Off”.
5) After you have made your selections, press the
cid/menu/hold key or return the
handset to the base.
The EXI3226 series
features include
AutoTalk
TM
and
AutoStandby
TM
.
AutoStandby allows you
to hang up by simply
returning the handset to
the base.
note
note
• Make sure your
battery pack is fully
charged before
setting Caller ID
options.
• Please return the
handset to the base
after you set CIDCW.
Auto Talk :Off
CIDCW :On
Area Code :
Line 1
Line 2
Language :Eng