Filter
Top Products
www.uniden.com
BASICS[ 22 ]
Using the Page Feature
To locate the handset (when it is off
the base), press
intercom on the base.
The handset beeps for 60 seconds.
The following screen appears:
Press any key on the handset to connect to the base.
Press
intercom on the base to return to standby.
Flash and Call Waiting
If you have “Call Waiting” service and
a call waiting tone sounds while you
are on a call, press
delete/flash to
accept the waiting call. There is a short pause, then you will hear the new caller.
To return to the original caller, press
delete/flash again.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually
change the phone’s channel for clear operation. This function works only
when the phone is in use.
The
channel on the handset allows you to choose between 20 different
channels. During the course of a conversation, if you hear static or noise
which makes it difficult to hear,
press
channel. The following screen
appears and the phone changes to a different channel.
For more information on interference, refer to page 52.
Paging
Scanning
12:34
Line 1
note
You must subscribe through your local telephone company to
receive Call Waiting Service.
note
The flash feature does
not function when
line
1
and line 2 are on a
conference call. (See
3-way conferencing and
4-way conferencing,
pages 27 and 28).
note
The UltraClear Plus
TM
true compander
circuitry virtually
eliminates background
noise. This innovative
technology, together
with 20 different
channels, provides you
with the best possible
reception during all
your conversations.