Filter
Top Products
50
Symptom Suggestion
Can’t make or receive calls. Make sure you are not too far from the base.
Make sure the line is not in use. If an outside call is already using a line,
you cannot use that line to make another outside call.
Check both ends of the base telephone line cord.
Make sure the AC adapter is plugged into the base and wall outlet.
Disconnect the AC adapter and reconnect.
Change the Digital Security Code (see page 49).
•
•
•
•
•
•
The handset doesn’t ring or
receive a page.
Make sure that you are not too far from the base.
Charge the battery in the handset for 15 to 20 hours by placing the handset
on the base or charging cradle.
Change the Digital Security Code (see page 49).
•
•
•
Severe noise interference. Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors, u-
orescent lights, and electrical appliances.
Move to another location or turn off the source of interference.
•
•
The Caller ID does not dis
-
play.
The call was placed through a switchboard.
Call your telephone provider to verify your Caller ID service is corrent.
There may be a problem with your Caller ID service.
•
•
You cannot register the hand
-
set at the base.
Charge the battery pack in the handset for at least
15 to 20 hours.
Change the Digital Security Code (see page 49).
•
•
The handset doesn’t commu
-
nicate with other handsets.
Change the Digital Security Code (see page 49).
Make sure you have registered all handsets.
•
•
An extra handset can’t join
the conversation.
Make sure there are not 2 handsets already using the conference feature.
Make sure that another handset is not in privacy mode.
•
•