Filter
Top Products
23
Adding Extra Handsets
Your phone supports up to four handsets, including any handsets supplied with your phone. Accessory handsets do
not need to be connected to a phone jack. You can now place a fully-featured cordless handset anywhere AC power
is available to connect the handset charger. The accessory handsets connect to the base to make and receive calls
just like the handset that came with the main base. All the handsets ring when you receive a call.
Compatible Handsets
Your phone is compatible with the following Uniden 2.4 GHz Digital Accessory Handsets: DCX640, DCX700, and
DCX750. (Please visit our website at
www.uniden.com for the most up-to-date list of compatible handsets.) If you
purchase an accessory handset, you must register the handset to the main base before use. Accessory handsets will
not operate until they are registered.
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack. The battery
recharges automatically when the handset is placed in the charger.
Connect the AC adapter to the
DC IN 9V jack and to a stan-
dard 120V AC wall outlet. Use only AC adapter Model Num-
ber AD-0005.
Set the charger on a desk or tabletop, then place the handset
in the charger with the keypad facing forward.
Make sure that the
charge LED illuminates. If the LED does
not illuminate, check that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
Charge the handset battery pack for at least 15-20 hours be
-
fore using your new cordless telephone for the rst time.
1.
2.
3.
4.