Filter
Top Products
48
To reset the handset, do the following:
Press and hold
[ ] and [#/>] for at least 5 seconds until the SYSTEM RESET menu appears.
Select DEREGISTER HS submenu. WHICH HANDSET? appears.
Move the cursor to select the handset ID to be deregistered from the list, and then press
.
DEREGISTER HS appears.
The phone will ask you to conrm the deregistration. Move the cursor to YES, and then press .
You will hear a conrmation tone. the handset will delete its own base information without trying to contact the
base. When the base information is deleted, the handset displays MODELS VARY! CHARGE HANDSET ON
THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL.
If the handset cannot contact the base, it displays UNAVAILABLE. Make sure the handset is in range of the base
and the base is connected to power.
Note: It is also possible to reset the handset back to its original factory settings. All changes including phone
-
book entries and Caller ID information will be erased. For more information on resetting the handset back to
factory settings and when you need to do this, see www.uniden.com or call our Customer Service Hotline (For
contact information, see the back page).
Resetting the Handset without the Base
If your original base is not available for some reason (for example, it is
lost or somehow incapacitated), you can still reset the handset and use it
with another base.
Press and hold
[ ] and [#/>] for at least 5 seconds until the
SYSTEM RESET menu appears.
Move the cursor to select the REPLACING BASE submenu, and
then press
. REPLACE BASE appears.
Move the cursor to select YES, and then press
. A conrmation tone sounds. The handset de-
letes its own base information without trying to contact the base. When the base information is deleted, the
handset displays MODELS VARY!
CHARGE HANDSET ON THE BASE REGISTRATION OR REFER TO
OWNER’S MANUAL.
To register the handset to the new base, see page 24.
1.
2.
3.
1.
2.
3.